英文Sawyer Merritt发布 2026/07/07 17:24· 入库 2026/7/8 00:00:58· Sawyer Merritt (@SawyerMerritt)
特斯拉Cybercab采用反应注塑工艺，涂装时间从数小时缩短至几分钟
原标题：Tesla on Cybercab in new report:
"Our new reaction injection molding (RIM) pro…
精华摘要
特斯拉在最新报告中披露，其专为Cybercab开发的新型反应注塑（RIM）工艺，将传统涂装车间的数小时生产周期缩短至几分钟，油漆在注塑过程中直接注入。采用该工艺的零部件，供应链和制造环节的温室气体排放减少35%，同时完全消除了传统涂装产生的挥发性有机化合物（VOC）排放。
这一工艺突破对特斯拉Cybercab的量产效率和可持续性具有关键意义。RIM工艺大幅缩短生产时间，有助于Cybercab在2026年实现规模化生产，降低单车制造成本。同时，VOC零排放和减排35%的指标，使特斯拉在环保法规趋严的背景下获得竞争优势，并可能推动其他车企在低成本车型中采用类似工艺。该技术若成功推广，将加速电动汽车制造向更高效、更绿色的方向转型。
原文摘要
Tesla on Cybercab in new report: "Our new reaction injection molding (RIM) process, engineered for Cybercab production, reduces manufacturing cycle times from hours in a traditional paint shop to just minutes with paint being injected during the molding process. For the parts put through the RIM process, supply chain and manufacturing GHG emissions are cut by 35% - and unlike traditional paint processes, this change has also eliminated volatile organic compound (VOC) emissions. This substantial leap in efficiency and sustainability underscores our commitment to scalable, low-impact innovati